2022 to now, in progress · 4xiDraw pen plotter, 3D-printed printhead, stepper motors, dyed sand · The Cooper Union
I'm building a printer that makes pictures out of dyed sand. It dithers an image to 12 colors and drops one grain of colored sand for each pixel.

Grains of sand, like pixels, can be remixed, moved and manipulated. Sand is also a finite resource, and changing data has a physical cost.
The machine
I started with the 4xiDraw, an open-source pen plotter. I 3D printed it, built it and drew with it until I knew how it worked. Then I edited its Python so it could print dithered images. The printhead I designed holds 12 cylinders of colored sand over a funnel, and a rack and pinion on a tiny stepper motor lets one grain at a time fall onto the page.





Where it is
I soldered the motors, got them moving and showed the parts at The Cooper Union in 2022. Then it stopped as a work in progress. I didn't know Python or electrical wiring when I started, so safe to say I learned a lot. And I learned that sand wants to keep moving.




Next, a camera above the tray will watch where each grain lands, and the printer will re-plan the rest of the picture around it.